Page 1 of 2 1 2 LastLast
Showing results 1 to 10 of 16

Thread: Zenon OPC Server Versions and Compliances?

  1. #1
    Join Date
    29.08.2009
    Location
    LEGAZPI CITY
    Posts
    56

    Default Zenon OPC Server Versions and Compliances?

    Hello!

    need infos for Zenon 6.22 OPC Server

    a.what is the OPC server version for Zenon 6.22?

    b.what are the compliance Zenon 6.22 OPC Server with OPC Foundation?

    Thanks!

  2. #2

    Default Re: Zenon OPC Server Versions and Compliances?

    the zenon OPC server for 6.22, is a general OPC DA 2.0 OPC server.

    Other standards like Historical Data, Alarms and Events, OPC XML DA 3.0, etc. are not supported. COPA-DATA is an OPC foundation member.

    For zenon 6.50, a OPC UA (Unified Architecture) Server is available.

  3. #3
    Join Date
    29.08.2009
    Location
    LEGAZPI CITY
    Posts
    56

    Lächeln Re: Zenon OPC Server Versions and Compliances?

    Thanks for the info Mark!

  4. #4
    industrijasrbije Gast

    Default Re: Zenon OPC Server Versions and Compliances?

    Quote Originally Posted by hoscillada View Post
    Thanks for the info Mark!
    Another question.
    Is it possible to control over FATEK PLC by OPC server?

  5. #5

    Default Re: Zenon OPC Server Versions and Compliances?

    Well, if Fatek offers an OPC Server, you can use the zenon OPC client driver to communicate.

    However direct communication is preferable over OPC DA in many cases.

    A quick google search revealed that the Fatek PLC allow Modbus TCP as an option in the communication module.

    Have you tried that?

  6. #6
    industrijasrbije Gast

    Default Re: Zenon OPC Server Versions and Compliances?

    Thank you for your response.
    I used to Fatek OPC and SCADA Aspic 3.30 and there was no problem.
    Use Modbus TCP communication module.
    Now I want to try Zenon just not sure whether it can.

  7. #7

    Default Re: Zenon OPC Server Versions and Compliances?

    It should be possible with both an OPC Client and the Modbus TCP driver, where the latter should be preferred to avoid adding a third component in the communication.

  8. #8
    Join Date
    29.08.2009
    Location
    LEGAZPI CITY
    Posts
    56

    Default Re: Zenon OPC Server Versions and Compliances?

    i installed zenon 6.5 using windows 7 professional 64bit. but when i checked the dcom configurations zenon opc server is not available..

    any idea?

  9. #9

    Default Re: Zenon OPC Server Versions and Compliances?

    Hi,

    have you tried installing the OPC DA core components from the "additional software" folder on the zenon DVD?

    Depending on your exact version, these may not be automatically installed.

    Regards,
    Mark

  10. #10
    Join Date
    29.08.2009
    Location
    LEGAZPI CITY
    Posts
    56

    Default Re: Zenon OPC Server Versions and Compliances?

    no..i have not installed the OPC DA.

    I will try it.


    thanks mark!

Similar Threads

  1. zenon server acting as a client
    By hoscillada in forum zenon Energy Edition
    Replies: 12
    Last Post: 7th January 2010, 07:42
  2. We need further information about web server on zenOn...
    By nuno_duarte in forum zenon Network
    Replies: 4
    Last Post: 18th March 2008, 18:05
  3. available zenOn versions for CE versions and platforms
    By sebastiank in forum Engineering Studio & Service Engine (former zenon Editor & Runtime)
    Replies: 0
    Last Post: 20th September 2007, 08:09

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •