Error in starting logic processor

[DeepakDeb]

Hi,

While starting Zenon runtime one of the logic processor do not start and generates the following error. Any idea what could be the reason?

09.11.2020 14:44:39re"> T5BusIec850s: Data attribute GPS_SWA1C1/LCCH28.ChLiv.t does not exist in IEC 61850 object model. Straton variable: GPS_SWA1C1_LCCH28_ChLiv_t.

09.11.2020 14:44:39re"> Opening bus driver 'T5BusIec850s' for cold resp. warm start failed.

09.11.2020 14:44:39re"> Starting application failed.

BR,
Deepak

[anthonyb]

Hello Deepak,

This error means that there is an IEC61850 Server configuration declared in your Fieldbus Configurations, as well as a variable having an IEC61850S2 Profile, which does not exist in this configuration.

Several solutions are possible depending on what you want to achieve; among other:

  1.  If you need this GPS_SWA1C1/LCCH28.ChLiv.t variable because it must exist on the target, then it probably means that the SCL file downloaded to the target is not the right one
=> Check that you selected the right file in the Fieldbus Configuration (right-click on the IEC61850 Server config > Read variables from SCL file > Insert)

  2.  If you do not need this variable, check in the IEC61850S2 Profiles which variable has LogicalDevice = GPS_SWA1C1 // LogicalNode = LCCH28 // DataObject = ChLiv // DataAttribute = t
=> Then, remove it in the dictionnary on the right.
Its variable name in the dictionnary corresponds to the "Name" column in the Profiles, here GPS_SWA1C1_LCCH28_ChLiv_t

Best regards,
Anthony