WebServer-Client Configuration

[shaun]

Hi All, 

If I'm using Zenon Web Server Pro light, and the workstation is connected to a server gateway and using its backbone network.
Webserver and Runtime are running at workstation. 
I would like to use webclient in another pc which is different vlan with the workstation. 

1. What PC name should I choose under network active pc option? my workstation or the server pc?
2. Webclient error with file cannot be accessed or open graphic with blue dot but all settings as mentioned in manual has been checked and correct. Would it be different vlan issue?

Anyone encountered these issue before?

Thanks

[joris.l]

Hi All, 

If I'm using Zenon Web Server Pro light, and the workstation is connected to a server gateway and using its backbone network.
Webserver and Runtime are running at workstation. 
I would like to use webclient in another pc which is different vlan with the workstation. 

1. What PC name should I choose under network active pc option? my workstation or the server pc?
2. Webclient error with file cannot be accessed or open graphic with blue dot but all settings as mentioned in manual has been checked and correct. Would it be different vlan issue?

Anyone encountered these issue before?

Thanks

Hello Shaun,
The Network setting in the Project must be the PC where your Runtime and Web Server is active.
For the global_vars configuration you must also choose this PC name as your Runtime PC. For the Web Server part i would suggest to use the IP adress if you do not have name-resolution for your web clients PC.