Showing results 1 to 2 of 2

Thread: YOKOGAWA DCS to zenon OPC-DA communication

  1. #1
    Join Date
    18.07.2017
    Posts
    12

    Frage YOKOGAWA DCS to zenon OPC-DA communication

    Hi

    I am investigating on establish connection between zenon SCADA and YOKOGAWA DCS by OPC-DA.
    As the DCS system is an old legacy system installed on site, there is no other way to make communication with them except OPC-DA.

    In such a situation, is it possible to connect zenon to DCS through OPC-DA client? please be aware that DCS  system already has the OPC-DA server.

    Is there any limitation or error prone facts in this condition??
    Any detail information in this regard is appreciated.

    Thank you so much for the concern


    Best regards
    Negin



  2. #2
    Join Date
    21.07.2017
    Posts
    4

    Default Re: YOKOGAWA DCS to zenon OPC-DA communication

    I think it's doable, but I'm not aware of any guidance to achieve this connection.
    ________________________
    Alexandra from gas analyzers
    Last edited by stefan_m : 21st June 2022 at 11:39

Similar Threads

  1. Communication Between Allen Bradley and Zenon
    By vivekgadre in forum Drivers
    Replies: 8
    Last Post: 21st December 2020, 19:48
  2. zenon EE 7.2 iec-61850 communication
    By nafunky7 in forum zenon Energy Edition
    Replies: 3
    Last Post: 12th November 2019, 08:37
  3. Beckhoff(v2.11 & v3.1) <> Zenon(v6.51 & v8.0) communication
    By BerrykL in forum Engineering Studio & Service Engine (former zenon Editor & Runtime)
    Replies: 0
    Last Post: 30th April 2019, 09:26
  4. Zenon to Zenon Logic communication issue
    By joelprasad in forum Engineering Studio & Service Engine (former zenon Editor & Runtime)
    Replies: 1
    Last Post: 23rd February 2019, 18:03
  5. Replies: 3
    Last Post: 11th September 2018, 13:00

Tags for this Thread

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •