Iec61850 Error

[hoscillada]

Hello!

Kindly help me with this one, I am having error whenever I download variables from a device using iec61850 protocol. I am using ZENON 6.22 SP1 and the operating system is WINDOWS 2008 STANDARD.

here is the error message

" an unhandled exception has occured.."

Attached are the image error and error file .

Thanks in advance!

[markusw]

Hi

It may help to use the latest driver. I can remember there were some problems in combination with special siprotec devices.
The easyest way would be to contact your support and ask for the latest Build for your version.

Best regards

Markus

[hoscillada]

Hi Mark!

Ok..Im connecting to SEL DEVICES tru IEC61850

so the main cause is iec61850 driver of zenon 6.22 sp1 is not compatible with Windows Server 2008?

Do you have alternative solution rather than changing the version of zenon?

[markusw]

so the main cause is iec61850 driver of zenon 6.22 sp1 is not compatible with Windows Server 2008?

Do you have alternative solution rather than changing the version of zenon?

With the latest Build for 6.22 SP1 you will not change the version of zenon.
I won't say it is Windows Server 2008.


Regards
Markus

[hoscillada]

thanks for the info, hopefully it will not take time to get the latest driver for iec61850 from local support..

I saw the same issue but it was posted in general support and they are talking in der local language.

[mytom]

Hi
I have problem before few time and with zenon 6.22 SP1 and with different RTU ( REG-DA, SEL) but only accept 'OK' , try again, It work fine next time. I also tried received some mms message after and fine.
Best regards.

[markclemens]

thanks for the info, hopefully it will not take time to get the latest driver for iec61850 from local support..

I saw the same issue but it was posted in general support and they are talking in der local language.

This other issue in the forum you are mentioning, happened when the runtime was running and communicating, and at the same time from the zenon editor the IEC61850 server station was browsed (import variables)

Is this the same in your case?

[hoscillada]

Hi Mark!

Its almost the same , runtime was running and communicating at the same time. And whenever I add IEDs and doing either plc browsing or file browsing. This error occurs only in WINDOWS 2008 but not in XP,VISTA AND 2003 SERVER. The detailed setup was sent to you by my supervisor thru your technical support.

We will try the one you sent to us ( build7).

Thanks again!

[markclemens]

any news yet on the test with build 7?

[rolindo]

any news yet on the test with build 7?

Build7 solved the problem, thanks.