Ethernet/IP Server and Ethernet/IP/I/O Scanner

[SRI]

Hello,

We have two straton running on two different PC's one is act as Ethernet/IP Server and another is Ethernet/IP/I/O Scanner.
As per given in help we have configured the required settings(e.g. instance, attribute)in both scanner and server but still we are not able to achieve data transfer between them. So is there any
manual or help files which we can follow to achieve the required result.

[ChristopherK]

Hello,

Please find attached a tutorial how to configure the Ethernet/IP Scanner in zenon Logic/straton
Please consider the following for the configuration of the Ethernet/IP Adapter in zenon Logic/straton:


In the Fieldbus Configurations under Ethernet/IP adapter enter for IP address the ip address of the network interface on your workstation which is used for communicating via Ethernet/IP within your network.
For I/O: Inputs (Target to originator) and I/O: Outputs (Originator to target) ensure that the values for Instance and size match those on the Ethernet/IP Scanner side.
For the variables within I/O: Inputs (Target to originator) and I/O: Outputs (Originator to target) ensure that the values for Offset, Bit and Format match those on the Ethernet/IP Scanner side.

Kind Regards,
Christopher Kern