Showing results 1 to 2 of 2

Thread: Using drivers from zenon Supervisor in SICAM 230

  1. #1
    Join Date
    09.05.2013
    Posts
    49

    Default Using drivers from zenon Supervisor in SICAM 230

    Hi,

    Is it possible to use drivers from zenon Supervisor in SICAM 230?
    I need to use MODBUS TCP and SNMP driver.
    Should I integrate the driver in file Treiber_EN.xml in folder C:\ProgramData\SIEMENS\SICAM230711?

    Does some on got an experience about it?

    regards,
    Svetozar Yolov

  2. #2
    Join Date
    01.07.2008
    Location
    Salzburg, AT
    Posts
    808

    Default Re: Using drivers from zenon Supervisor in SICAM 230

    SICAM 230, especially in Energy, follows another philosophy as zenon. Thus, even if you force the zenon native driver to start together with SICAM 230 Runtime, there is no guarantee that there will be no some strange effects. I would not risk a mixed constellation for a final system, working then in a real utility.

Similar Threads

  1. zenon logic to zenon supervisor
    By MJ in forum zenon Supervisor
    Replies: 1
    Last Post: 26th July 2019, 10:25
  2. Zenon supervisor
    By Otmane2019 in forum zenon Supervisor
    Replies: 1
    Last Post: 23rd April 2019, 07:25
  3. Drivers won't start
    By dlumbar in forum zenon Supervisor
    Replies: 6
    Last Post: 11th January 2018, 09:13
  4. Load Management in Zenon Supervisor
    By kingsley in forum zenon Energy Edition
    Replies: 1
    Last Post: 5th April 2016, 07:47
  5. Replies: 5
    Last Post: 25th February 2013, 15:43

Tags for this Thread

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •