Showing results 1 to 4 of 4

Thread: Zenon6.INI file corruption

  1. #1

    Beitrag Zenon6.INI file corruption

    Hi,

    The configured Zenon6.ini file is corrupting or going to default configuration at the time of unexpected shutdown of PC.

    Please give me a solution.

    Thanks.

  2. #2
    Join Date
    25.06.2012
    Posts
    155

    Default Re: Zenon6.INI file corruption

    Dear Kameshwaran_Subburaj,

    Why do you think that zenon6.ini file is corrupted or changes back to defaults? 

    Normally, zenon6.ini file is not open/accessed permanently so that an unexpected shutdown of the system should not trigger the reported behavior.

    Please check Windows configuration or other applications that can restore the system volume automatically to a previous restore point in case of an unexpected shutdown of the system.

    Thank you very much.

    Best regards,
    David Cerdeira

  3. #3

    Default Re: Zenon6.INI file corruption

    Dear David, 

    I have configured RT*settings (Frame size) in zenon6.INI file and it was working fine after configuration.

    As I mentioned before, after the unexpected shutdown of PC, this configuration is erased and I observed that it went to default configuration.

    I hope you understand the situation and please help me out.

    Thanks

  4. #4
    Join Date
    25.06.2012
    Posts
    155

    Default Re: Zenon6.INI file corruption

    Dear Kameshwaran_Subburaj,

    thank you very much for sharing further information.

    As written before, please make sure that the zenon6.ini file is not restored back to a previous version by Windows or any other software automatically if there is an unexpected shutdown of the machine.

    For instance, you can find the different versions of the file available in the OS as shown below:



    Thank you very much.

    All the best,
    David Cerdeira
    Attached Thumbnails Attached Thumbnails 2019-09-09_15h28_04.png  

Similar Threads

  1. Replies: 1
    Last Post: 10th March 2015, 13:22
  2. SIMUL32-Einträge in zenon6.ini
    By michab in forum Drivers
    Replies: 1
    Last Post: 6th August 2013, 00:34
  3. zenon6.51 SP0 Build19
    By talal.mubarak in forum Editor and Runtime Setup
    Replies: 1
    Last Post: 25th March 2013, 14:11
  4. Zenon6.5 to siprotec
    By arash in forum zenon Energy Edition
    Replies: 3
    Last Post: 13th January 2011, 16:16
  5. Zenon6.ini Windows sbs
    By rloureiro in forum zenon Supervisor
    Replies: 4
    Last Post: 6th June 2008, 17:14

Tags for this Thread

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •