Showing results 1 to 3 of 3

Thread: Relay modelling

  1. #1
    Join Date
    04.09.2009
    Posts
    84

    Default Relay modelling

    Respected all,

    Is it possible in Zenon 6.22 SP1 to model SEL or Siemens Protection Relays? Modeling of the relays should be such that I can use the CID (Relay configuration files) files in the software model of the Relays in order to work with the variables of my interest. Moreover, I can test the communication with the relays and analyze the data (may be random) by the relays.


    Regards

  2. #2
    Join Date
    04.09.2009
    Posts
    84

    Rotes Gesicht Re: Relay modelling

    Quote Originally Posted by shikra View Post
    Respected all,

    Is it possible in Zenon 6.22 SP1 to model SEL or Siemens Protection Relays? Modeling of the relays should be such that I can use the CID (Relay configuration files) files in the software model of the Relays in order to work with the variables of my interest. Moreover, I can test the communication with the relays and analyze the data (may be random) by the relays.


    Regards
    *....I can test the communication with the relays and analyze the data (may be random) monitored by the relays

  3. #3
    Join Date
    04.09.2009
    Posts
    84

    Default Re: Relay modelling

    ah..sorry Guys, just found the solution, the help was in the IEC-61850 driver's manual

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •