Showing results 1 to 6 of 6

Thread: S71200 error

  1. #1
    Join Date
    28.03.2018
    Posts
    14

    Default S71200 error

    Hi,

    I have created a sample project in TIA V13 and tried to communicate with Zenon 8.0 but no communication. Attached the diag viewer
    Attached Thumbnails Attached Thumbnails S71200 error.PNG  

  2. #2
    Join Date
    15.11.2016
    Posts
    88

    Default Re: S71200 error

    Hi Sandeep,

    It seems you are using the S7TCP-IP driver and not the S7 Driver for S7-1500/1200

    BR,
    Georg

  3. #3
    Join Date
    28.03.2018
    Posts
    14

    Default AW: S71200 error

    Hi georg,

    When I select S7 driver for S71200 I am not able to select PLC marker as there is only 2 options ie communication variables and symbolic variables

    Regards
    Sandeep

  4. #4
    Join Date
    15.11.2016
    Posts
    88

    Default Re: S71200 error

    Hi Sandeep,

    If you have a S7-1200 PLC but want to use the S7TCP32 driver, you have to check these things:
    PLC:
    - PUT/GET enabled
    - Datablocks with variables used in zenon: deactivate optimised datablock access

    driver:
    - remote TSAP: 02.01

    Hope this helps.

    If need more detailed help, please consult you local zenon support.

    BR,
    Georg

  5. #5
    Join Date
    28.03.2018
    Posts
    14

    Default AW: S71200 error

    Dear Georg,

    Thanks for the response, I was just trying to test communication between Zenon and S71200 PLC with a simple logic by using PLC Marker bits, I ve enable the PUT GET from cpu properties and still no result. May be the variable configuration is not correct.

    Regards
    Sandeep
    Attached Thumbnails Attached Thumbnails s7 driver.PNG   %M0.0.PNG  

  6. #6
    Join Date
    28.03.2018
    Posts
    14

    Default AW: S71200 error

    Hi,



    Issue has been solved after doing some correction in the variable addressing, Now I am able to communicating with S71200 by using S7TCP/IP protocol. 

    Thanks for the support
    Sandy

Similar Threads

  1. Replies: 2
    Last Post: 19th May 2018, 06:19

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •