Showing results 1 to 2 of 2

Thread: Process gateway in redundant mode

  1. #1
    Join Date

    Default Process gateway in redundant mode


    I was wondering, how exactly am i suppose to configure process gateway to send all its values to a specific ip-address when i'm using it in redundancy mode?

    Our customer needs to configure the recieving end so that it looks at a specific ip-address and i have 2 different ip-addresses since theres 2 servers running one instance of process gateway each.
    If i give them the ip for the primary server the communication will die if the primary server die..

    Is there a way to make a virtual ip or something? so 2 different ip-addresses are provided and out comes a 3rd adress?


    Sith Lord @ Omexom Sweden

  2. #2
    Join Date
    Salzburg, AT

    Default Re: Process gateway in redundant mode

    Which zenon Process Gateway are you using?

    In general, if on a PC you exit zenon Runtime (or the PC would "die") then also zenon Process Gateway will exit its task - there is no source of data anymore, so how zenPG could continue to run and send something. It has data from zenon Runtime - no RT, no zenPG.

    The best way to have zenPG communicating with a remote master also while loss of a Network Server (so after redundancy switch) - start zenPG on zenon Network Client. The process data on Network Clients is exactly the same as on Network Servers, so zenPG on Net-Client will deliver to remote master the same information. And while redundancy switch the zenon Client will automatically reconnect to Standby, as soon Standby takes over. Thus, zenPG running on Net-Client will be shortly able to continue data transmission.

Similar Threads

  1. Redundant Proccess Gateway
    By yara in forum Gateways
    Replies: 5
    Last Post: 2nd February 2015, 14:22
  2. Redundant Proccess Gateway
    By yara in forum Drivers
    Replies: 5
    Last Post: 2nd February 2015, 14:22
  3. Redundant Process Gateway
    By talal in forum Gateways
    Replies: 1
    Last Post: 23rd October 2014, 15:45
  4. Process Gateway
    By murphys in forum Gateways
    Replies: 4
    Last Post: 8th February 2011, 09:45
  5. Process Gateway
    By hoscillada in forum Gateways
    Replies: 12
    Last Post: 8th November 2009, 22:57

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts