Showing results 1 to 2 of 2

Thread: IEC62056 Communication details

  1. #1
    Join Date
    07.05.2015
    Posts
    1

    Default IEC62056 Communication details

    Hi All,

    I look for more detail of the communication details of channel type 35. For the IEC850 we use this communication details for check if the device is online.
    For the IEC62056 i dont find this can't of details.

    Best regards,
    Bert

  2. #2
    Join Date
    01.07.2008
    Location
    Salzburg, AT
    Posts
    615

    Default Re: IEC62056 Communication details

    Only some of zenon drivers are supporting an extra 'Connection State' indicator variables. In iec850 driver this indicator informs about the state of association, not only if a connections with the IED is there or not; if has 10(!) states. In IEC62056 driver there is no special indicator.

    All zenon drivers, by connection loss, are setting the status bit INVALID to all variables. To check if a device is online you can evaluate this status bit in a reaction matrix, linked with any variable.

Similar Threads

  1. IEC62056 / TCP/IP problem
    By hm123 in forum Drivers
    Replies: 1
    Last Post: 3rd July 2017, 13:42
  2. Process Gateway - Modbus slave - Addressing details
    By saravanan1985 in forum Drivers
    Replies: 3
    Last Post: 16th February 2017, 08:41
  3. Process Gateway - Modbus slave - Addressing details
    By saravanan1985 in forum zenon Energy Edition
    Replies: 0
    Last Post: 7th February 2017, 17:32
  4. Trend details
    By bojan in forum zenon Supervisor
    Replies: 1
    Last Post: 30th March 2011, 00:00
  5. How to populate details of alarm variables?
    By nahala in forum zenon Supervisor
    Replies: 5
    Last Post: 14th May 2009, 09:06

Tags for this Thread

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •