Showing results 1 to 2 of 2

Thread: 100ms Timer has not cycled for 226235ms

  1. #1
    Join Date
    02.02.2018
    Posts
    9

    Default 100ms Timer has not cycled for 226235ms

    Hello all,


    Actual when I try to open particular screen in zenon then sometimes it gets in hang condition. like no button will work in zenon . For the proper operation I have to close zenon by using task manager and again open it using startup tool.
    This is not a frequent condition but sometimes it happen on that particular screen only while I try to open.
    When I started diagnosis viewer in which at that condition the error is showing like "100ms Timer has not cycled for 226235ms"
    Process id : 6560
    Log id : 1
    Thread id : 1260
    Message Level : ERRORS
    Module : Supervisor
    Name of log connection : zenrt32
    Name of source file : ZENONRT.CPP
    Error text: 
    100ms Timer has not cycled for 226235ms


    Using Zenon 7.10 SP0 Build 5560
    Windows 10 Pro, Installed RAM:4 GB

    I have not any clue to resolve this.

    thanks in advance,

    Regards,
    SRI




  2. #2
    Join Date
    01.07.2008
    Location
    Salzburg, AT
    Posts
    955

    Default Re: 100ms Timer has not cycled for 226235ms

    This LOG entry informs that the Runtime is tottaly blocked; the 226235ms are almost 4 minutes when the zenon Runtime was so occupied (e.g. by some not breakable task) that it couldn't react properly.
    A typical causes are:
    - VBA, e.g. a VBA code which needs for single execution too much ressources or has dependency to time consuming requests form Hardware, causes recursive calls etc.    
    - a recursive call of zenon functions resulting in re-open of this screen; e.g. when the screen is configured to have a 'Start function' with then changes a value or opens another screen and these next actions are finally resulting in (re)opening of the first screen.

Similar Threads

  1. LOG ERROR: 100ms Timer has not cycled
    By galax in forum zenon Service Engine Supervisor
    Replies: 6
    Last Post: 7th March 2016, 10:55
  2. Timer
    By zimou in forum zenon Service Engine Supervisor
    Replies: 1
    Last Post: 18th July 2014, 12:56
  3. Screen Timer
    By rob.machin@capula.co.uk in forum zenon Service Engine Supervisor
    Replies: 4
    Last Post: 21st February 2013, 11:54
  4. Timer for control
    By yara in forum Drivers
    Replies: 6
    Last Post: 28th January 2011, 14:32
  5. VBA Timer
    By hansvanzijp in forum VBA
    Replies: 4
    Last Post: 15th September 2009, 03:04

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •