Showing results 1 to 3 of 3

Thread: Configuration of IEC60870-5-101/104 Driver in SICAM 230

  1. #1
    Join Date
    01.12.2016
    Posts
    1

    Default Configuration of IEC60870-5-101/104 Driver in SICAM 230

    This is probably a "newbie" question, but I am unable to find any information on how to configure the IEC 60870 driver (Siemens IEC60870-5-101/104 (AKServer) Driver) in SICAM 230 version 7.20 SP0 Build 24121. Is there a manual, help or anything describing how to set up this driver? The only reference I can find in the documentation is related to the Process Gateway, but this requires a separate license...

    The image below shows that it is possible to add a driver. Adding variables is also possible, but configuration of the driver is not possible.

    Attached Thumbnails Attached Thumbnails sicam_60870.png  

  2. #2
    Join Date
    01.07.2008
    Location
    Salzburg, AT
    Posts
    765

    Default Re: Configuration of IEC60870-5-101/104 Driver in SICAM 230

    The AK-Driver is developed and documented by Siemens, not by COPA-DATA. If there is no Help for this driver in your SICAM230 installation then please contact the SICAM Support.

  3. #3
    Join Date
    28.02.2017
    Posts
    5

    Default Re: Configuration of IEC60870-5-101/104 Driver in SICAM 230

    check in folder C:\Program Files (x86)\SIEMENS\SICAM 230 7.20 SP0\HELP\ENGLISH\Driver

Similar Threads

  1. IOA addressing issue with IEC60870-5 104 driver in zenOn
    By markclemens in forum zenon Energy Edition
    Replies: 1
    Last Post: 28th January 2016, 10:57
  2. Normalized value with IEC60870-5-101/104
    By markclemens in forum zenon Energy Edition
    Replies: 1
    Last Post: 22nd January 2016, 11:38
  3. Normalized value with IEC60870-5-101/104
    By markclemens in forum Drivers
    Replies: 1
    Last Post: 22nd January 2016, 11:38
  4. IEC 61870-5-104 driver for SICAM 230 SP1
    By kirca in forum zenon Energy Edition
    Replies: 5
    Last Post: 22nd August 2011, 15:04
  5. IEC 61870-5-104 driver for SICAM 230 SP1
    By kirca in forum Drivers
    Replies: 5
    Last Post: 22nd August 2011, 15:04

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •