Showing results 1 to 2 of 2

Thread: Zenon 7.11 is incompatible with Multiltin ( 61850 ) Protection Devices

  1. #1
    Join Date
    17.02.2016
    Posts
    1

    Unglücklich Zenon 7.11 is incompatible with Multiltin ( 61850 ) Protection Devices

    We are currently using Zenon V7.11 as our HMI / SCADA.

    We cannot get it to successfully get data from GE Multilin G60 and F650 Protection Devices using 61850.

    The issue is that the Zenon needs to set an integrity period when initialising the 61850 MMS Reports. However this functionality is not supported in this version. This seems a major omission as setting integrity periods by the client must be a "must have"

    Does anyone know a workaround?

  2. #2
    Join Date
    18.07.2011
    Posts
    136
    Best Answer

    Default AW: Zenon 7.11 is incompatible with Multiltin ( 61850 ) Protection Devices

    Hi Phil and welcome to the copa data forum.

    With zenon 7.20 some new features for reporting were implemented. Since then also integrity periods, buffer time, retries to enable RCBs and some additional optional fields can be configured within the IEC850 driver.

    Did you already check the opportunity to update your zenon Version?

    HTH,
    johannes

Similar Threads

  1. REG-DA (IEC 61850) in Zenon 7
    By bnekooie in forum zenon Energy Edition
    Replies: 3
    Last Post: 19th January 2016, 14:47
  2. IEC 61850 to send variables from SCADA to ZENON
    By jonastj in forum straton / zenon Logic
    Replies: 1
    Last Post: 27th February 2015, 13:30
  3. Chinese language on CE devices
    By sebastiank in forum zenon Operator
    Replies: 2
    Last Post: 13th April 2010, 23:50
  4. I/O Devices
    By nahala in forum straton / zenon Logic
    Replies: 1
    Last Post: 31st August 2009, 02:30
  5. Zenon project protection from uploading
    By mattsd in forum zenon Operator
    Replies: 5
    Last Post: 11th June 2008, 10:35

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •