Showing results 1 to 4 of 4

Thread: Can not find Verbindungnamen in Zenon editor Version 5.5 SP7

  1. #1
    Join Date
    07.05.2016
    Posts
    1

    Default Can not find Verbindungnamen in Zenon editor Version 5.5 SP7

    Hello,

    I have a problem with Zenon v 5.50 SP7 that I can not find the Verbindungnamen in the S7 NT - S7 300/400 driver See attached file please! Iamge 1

    At Image 1 you will see that the S7 driver could not be able to show " zenOn" application and you will see also "the station configuration editor "where I had added the CP5611 and zenon application

    See also Image 2 the hardware configuration which I have done .

    So Kindly help me in this Issue because I have a problem in my factory.
    Attached Thumbnails Attached Thumbnails 1.jpg   2.jpg  

  2. #2
    Join Date
    05.05.2016
    Posts
    2

    Default Re: Can not find Verbindungnamen in Zenon editor Version 5.5 SP7

    Quote Originally Posted by m.aghory View Post
    Hello,

    I have a problem with Zenon v 5.50 SP7 that I can not find the Verbindungnamen in the S7 NT - S7 300/400 driver See attached file please! Iamge 1

    At Image 1 you will see that the S7 driver could not be able to show " zenOn" application and you will see also "the station configuration editor "where I had added the CP5611 and zenon application

    See also Image 2 the hardware configuration which I have done .

    So Kindly help me in this Issue because I have a problem in my factory.
    I'm working on the same problem.
    Additional information:
    - The ZenOn software is installed on a Simatic PC 677B of part no. 6AV7876-0AA20-1AB0

    - The PC has an embedded CP of part no. CP5611/V3.0.1

    - The PC is connected to a Simatic PLC S7-315-2 DP of part number 6ES7 315-2AF03-0AB0/V1.2

    - The connection between the PLC and the PC (Through the CP) is by a ProfiBus network.

    The runtime always shows "PLC OFFLINE"

  3. #3
    Join Date
    30.05.2007
    Posts
    105

    Default Re: Can not find Verbindungnamen in Zenon editor Version 5.5 SP7

    Hi,

    please change the driver configuration 'VFD names:' to zenOn instead of VFD_1
    The name of the application is the reference to get the 'Verbindungsnamen'= 'Connection Name' of your S7_Connection.

    Markus

  4. #4
    Join Date
    05.05.2016
    Posts
    2

    Default Re: Can not find Verbindungnamen in Zenon editor Version 5.5 SP7

    Thank you, Markus. That fixed our problem and the unit is connected to the PLC now.

Similar Threads

  1. software ZenOn 5.50 sp7
    By paheh in forum zenon Supervisor
    Replies: 1
    Last Post: 1st October 2014, 08:31
  2. How to installed Zenon5.50 sp7
    By lalitsharma2709 in forum Editor and Runtime Setup
    Replies: 1
    Last Post: 6th October 2013, 23:26
  3. Advantage of ZenOn Energy version versus Standard version?
    By lephis in forum zenon Energy Edition
    Replies: 1
    Last Post: 23rd June 2011, 23:54
  4. Replies: 4
    Last Post: 26th June 2009, 13:29
  5. Replies: 0
    Last Post: 20th August 2007, 17:04

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •