Showing results 1 to 3 of 3

Thread: SICAM 230 7.0 Server can not detect Client PC

  1. #1
    gorbay Gast

    Default SICAM 230 7.0 Server can not detect Client PC

    Hello dear Copa-Data Team,

    I have 2 server and 2 Operator Working station (OWS) (Clients). Communication between OWS1 and servers are ok but problem is when I initialize the runtime from OWS2 any of the servers can not detect OWS2 as client. For this reason I read all values invalid as if ıts running on seperate network.

    Although ZenDb, sysSrv, zenon32 is working properly, the result is the same.

    Thank you for your kind help ,

  2. #2
    gorbay Gast

    Default Re: SICAM 230 7.0 Server can not detect Client PC

    Any help ?

  3. #3
    gorbay Gast

    Default Re: SICAM 230 7.0 Server can not detect Client PC

    Helle everyone,

    I have fixed the problem and would like to explain what is it. May be It can be helpfull for my colleagues!

    The problem was about the "Start Project". I mean, start project was different which runs on my server pc from client pc.

    There is two option here, First (I choosed this way), you have to establish remote control from Sicam 230 editor, afterwards you have to set you "start project" with same as your server PC, and later on send all Runtime folders regarding place.

    Second way is doing it manually, find zenon6.ini, the path is below, (C:\ProgramData\SIEMENS\SystemC:\ProgramData\SIEME NS\System\Zenon6.ini )

    When you open it, you will encounter rows which starts with "VBF" and delete it. Then, open startup manager and "download RT folders from server PC"

    I hope this will help someone!

Similar Threads

  1. Sicam 230
    By yolovs in forum zenon Energy Edition
    Replies: 7
    Last Post: 13th June 2016, 08:46
  2. Sicam 230
    By tihomir in forum zenon Energy Edition
    Replies: 1
    Last Post: 27th May 2014, 06:55
  3. SICAM 230 with ABB RTU560CMG
    By onder89 in forum zenon Energy Edition
    Replies: 15
    Last Post: 19th June 2013, 00:20
  4. help in Sicam 230
    By imran in forum zenon Energy Edition
    Replies: 1
    Last Post: 11th May 2012, 00:11
  5. IEC 61870-5-104 driver for SICAM 230 SP1
    By kirca in forum zenon Energy Edition
    Replies: 5
    Last Post: 22nd August 2011, 15:04

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •