Showing results 1 to 3 of 3

Thread: Missing drivers for engines on EV3

  1. #1
    Join Date
    13.01.2015
    Posts
    8

    Default Missing drivers for engines on EV3

    Hey guys, anyone knows how to solve this problem, when i configure my controler to the ev3, only shows sensors e the button, but no drivers... Thanks.

  2. #2
    Join Date
    17.12.2014
    Posts
    4

    Default Re: Missing drivers for engines on EV3

    Hi manoelribas,

    if you are using the EV3 Brick the Drives wont be displayed in the fieldbus configuration.
    You have to control the drives directly, for example, via function blocks. I attached a Screenshot where you see the right function blocks.

    David.Schwarzl posted a good how-to guide here: (2nd post in this Thread)
    http://www.copadata.com/forums/showthread.php?t=2928

    Best Regards
    Philip Lammerhuber
    Attached Thumbnails Attached Thumbnails EV3_FB_ROTATE.png  

  3. #3
    Join Date
    13.01.2015
    Posts
    8

    Default Re: Missing drivers for engines on EV3

    Thank you very much philipl.

Similar Threads

  1. Missing Motors in FieldbusKonfig of zenon logic for EV3
    By marcel.widmer in forum straton / zenon Logic
    Replies: 5
    Last Post: 2nd April 2015, 08:06
  2. Zenon Logic sample program for EV3 needed
    By dimi in forum straton / zenon Logic
    Replies: 1
    Last Post: 10th July 2014, 10:23
  3. Siemens S7 drivers
    By kropfm in forum Drivers
    Replies: 10
    Last Post: 9th December 2013, 12:08
  4. Different drivers in one structure datatype
    By stolyarov_as in forum zenon Supervisor
    Replies: 2
    Last Post: 13th December 2011, 08:30

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •