Showing results 1 to 2 of 2

Thread: Class poll for DNP3.0 process gateway

  1. #1
    Join Date
    01.04.2014
    Posts
    2

    Default Class poll for DNP3.0 process gateway

    Hi,

    I need to define classes for DNP3.0 process gateway. So that the master station polls the data accordingly.

    I cannot find any procedure or manual to do so, can anyone help me with this matter.

    I am trying to send signals (digital and analog) to master station using DNP3.0 process gateway. Without the defination of polling classes I am facing delays.

  2. #2

    Default Re: Class poll for DNP3.0 process gateway

    Hi talal,

    The event classes are preconfigured in the DNP3 process gateway and currently this configuration cannot be changed.

    Unfortunately also the function "Assign class" is not supported at this stage by the DNP3 process gateway.

    A DNP3 master however is able to send read requests for class 1230 or 123 and will get the static and event data from the DNP3 process gateway.

    I hope this answers your question.

    Best regards,
    Mark

Similar Threads

  1. Process Gateway IEC870SL
    By lunzer in forum Drivers
    Replies: 7
    Last Post: 8th August 2017, 12:28
  2. Process Gateway
    By murphys in forum Drivers
    Replies: 4
    Last Post: 8th February 2011, 09:45
  3. Multiple Master in DNP3 process gateway
    By rolindo in forum Drivers
    Replies: 13
    Last Post: 30th August 2010, 08:55
  4. Process gateway-DNP3
    By rolindo in forum Drivers
    Replies: 1
    Last Post: 17th December 2009, 02:03
  5. Process Gateway
    By hoscillada in forum Drivers
    Replies: 12
    Last Post: 8th November 2009, 22:57

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •