Showing results 1 to 10 of 14

Thread: Colour and infrared sensors

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    petzi91 Gast

    Unglücklich Colour and infrared sensors

    Hello community,
    I have the problem that I can`t use the colour AND the infrared sensor together. I have written one program in which I wanted to use both. If I use only one of them (the colour sensor OR the infrared sensor), I will have no problems. But if use both, the colour sensor blinks red instead of shine "colourful" ( because I set Port_1_Mode := 2; so that I can differentiate between different colours).
    Has anybody the same problem or an idea how to solve this problem?
    Kind regards
    Petzi

  2. #2
    patrick0707 Gast

    Default Re: Colour and infrared sensors

    Hello petzi91,

    I have no information that this is not possible.

    have you defined 2 Ports, in your program?

    Best regards,
    Patrick Adlgasser
    Last edited by patrick0707 : 1st August 2014 at 08:02

  3. #3
    petzi91 Gast

    Default Re: Colour and infrared sensors

    Hello Patrick 0707,
    of course, Port 0 is used by the infrarad sensor and port 2 is used by the colour sensor. I tried so much but I don`t know what to do now.
    Best regards
    Petzi

  4. #4
    patrick0707 Gast

    Default Re: Colour and infrared sensors

    And when you use Port 1 for the infrared sensor and port 2 for the colour sensor.

    Best regards
    Patrick Adlgasser

  5. #5
    patrick0707 Gast

    Default Re: Colour and infrared sensors

    When you want you can send your project to our support email address.

    support@copadata.com

    Best regards
    Patrick Adlgasser
    Last edited by admin : 1st August 2014 at 10:16

  6. #6
    petzi91 Gast

    Default AW: Re: Colour and infrared sensors

    Hello Patrick 0707,
    I already tried it, unfortunately it does not make a difference.
    Best regards
    Petzi

Similar Threads

  1. changing object colour from multiply variables
    By mattsd in forum zenon Supervisor
    Replies: 4
    Last Post: 12th November 2007, 02:09

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •