Showing results 1 to 3 of 3

Thread: text message and other

  1. #1
    Join Date
    28.10.2013
    Posts
    10

    Default text message and other

    i' m very new with Zenon so i have these issue: where i write the text of the message ?(prompted when one bit in plc will go to one).
    2) I put a 0/1 switch in a screen with an associated variable (bit); if i write this bit from plc program i see in runtime the state of the switch in the screen changing( from ON to OFF or from OFF to ON) but nothing happen if i click on the switch (the associated variable doesn't change), what do i forget?

    Thanks

  2. #2

    Default Re: text message and other

    Hello,
    if I understand correct, the value changes on the plc are displayed correctly in zenon but writing a value through zenon to the plc seems not to work.

    Some questions:
    What exact zenon version is in use?
    What driver are we speaking of?
    Are this mentioned bits, outputs? (drivers must sometimes explicitly configured to write outputs)
    Last edited by wolfgangm : 29th October 2013 at 12:47

  3. #3
    Join Date
    28.10.2013
    Posts
    10

    Default Re: text message and other

    Quote Originally Posted by wolfgangm View Post
    Hello,
    if I understand correct, the value changes on the plc are displayed correctly in zenon but writing a value through zenon to the plc seems not to work.

    Some questions:
    What exact zenon version is in use?
    What driver are we speaking of?
    Are this mentioned bits, outputs? (drivers must sometimes explicitly configured to write outputs)
    you understood well for point 2.
    driver:S7TCP32_S7 TCP-IP
    bit mentioned isn`t an output is for es.DB116.DBX5.0

    about point 1, i just need to know where do i write the text message for a message or alarm

    Thanks
    Last edited by aleb2 : 29th October 2013 at 15:11 Reason: correction

Similar Threads

  1. DynProperties("Text") of a static text
    By jurijcadez in forum VBA
    Replies: 3
    Last Post: 12th June 2012, 14:09
  2. Message Control / Text to Speech
    By ptkdennis in forum zenon Supervisor
    Replies: 2
    Last Post: 7th July 2009, 12:55
  3. using a text box
    By beer_klinkhammer in forum VBA
    Replies: 1
    Last Post: 15th January 2009, 16:37
  4. Replies: 0
    Last Post: 27th September 2007, 13:17
  5. Replies: 0
    Last Post: 25th September 2007, 14:10

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •