Showing results 1 to 4 of 4

Thread: Backnet driver

  1. #1
    Join Date

    Default Backnet driver

    Hi all,

    Regarding Backnet driver, (zen 7.10)

    while communicate with device via backnet driver,
    the communicate is not working after several hours.
    but connection is ok.

    important thing is that it could not recommunicate.
    it may lose a communicate between both.

    so, how to set a driver (polling type) to variables

    i wanna check a communication them on polling.

  2. #2

    Default Re: Backnet driver

    which Bacnet Driver is in use the Bacnet32 or the BacnetNG?
    What does the Diagnosis Viewer(DiagViewer.exe) tells you are there any Errors logged?

    What device (plc) the Driver communicates to, is this plc supported? -> Check the Driver Doku in the online help (F1)!

  3. #3
    Join Date

    Default Re: Backnet driver


    Can Someone tell me how many datapoints can be in one BacnetNG driver?

  4. #4

    Default Re: Backnet driver

    The BACnet/IP driver for KEPServerEX provides an interface to connect, monitor, and control building automation devices—providing real-time data to a myriad of software applications, from building and energy management systems to enterprise IT networks. It provides connectivity to equipment using the BACnet protocol over Ethernet (often referred to as "BACnet/IP" or "Annex J"). Devices on other BACnet network types may be accessed using BACnet gateway devices.
    طراحی نما

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts