Showing results 1 to 3 of 3

Thread: How to show the list for all Messages sent in ZenOn 7?

  1. #1
    Join Date
    23.04.2009
    Posts
    56

    Default How to show the list for all Messages sent in ZenOn 7?

    Hi,

    As the title, how to show the event list for all Messages sent in ZenOn 7?

    In ZenOn 6.5, every Message Control event is registered in the CEL. For example, we can check, at 8:00 in the morning, all the Message Control events during the last night (we can know the detail about when ZenOn sent some messages to whom, and if the message is confirmed or not etc.).

    But we found in ZenOn 7, this system is changed. We can no longer find Message Control event in the CEL. A "Message Gestion" picture is needed for this goal, and it shows only the Message during sending. Once the message is sent, we can not make it shown in the list..

    Maybe we just misunderstood something.. Can you please give us some indication, in order to make ZenOn 7 shown all historical Message Control events?

    Thank you.

  2. #2
    Join Date
    01.07.2008
    Location
    Salzburg, AT
    Posts
    823

    Default Re: How to show the list for all Messages sent in ZenOn 7?

    The Message Control in zenon 7 still writes in CEL. When you don't see the entries then it must be some wrong setting. Set in screen switch function - which opens CEL screen - to show historic data (so not only data from ring-buffer) and set the time filter for the period you want.

    And check also what is set in Message Control module - project-specific settings - Log in CEL.

  3. #3
    Join Date
    23.04.2009
    Posts
    56

    Default Re: How to show the list for all Messages sent in ZenOn 7?

    Thank u a lot ursulap, I found the list now.

    Bye the way, I have another question about the message control :
    There is a parameter [Message Control] -> [Project-specific settings] -> [Max. number of attemps]

    Before in the 6.5 version, we can set this parameter as 0; But now in 7.0 version, the minimum value is limited to 1.. I don't like it, because sometime some bugs appear following this parameter. That is why I prefered 0 during 6.5 version.

    Can you just modify this for zenon 7.1, in order to make possible the value of 0 as the minimum?




    Quote Originally Posted by ursulap View Post
    The Message Control in zenon 7 still writes in CEL. When you don't see the entries then it must be some wrong setting. Set in screen switch function - which opens CEL screen - to show historic data (so not only data from ring-buffer) and set the time filter for the period you want.

    And check also what is set in Message Control module - project-specific settings - Log in CEL.

Similar Threads

  1. CEL - Internal System Messages
    By danillu in forum zenon Supervisor
    Replies: 3
    Last Post: 12th March 2012, 00:15
  2. How to show alarms with status bit "Revision" in alarm list
    By softart2 in forum zenon Supervisor
    Replies: 1
    Last Post: 9th February 2012, 23:46
  3. Event list classes and internal system messages
    By softart2 in forum zenon Supervisor
    Replies: 3
    Last Post: 19th May 2011, 05:59
  4. GOOSE messages in STRATON
    By mansoorhussain in forum straton / zenon Logic
    Replies: 3
    Last Post: 14th January 2011, 00:37
  5. Replies: 0
    Last Post: 20th August 2007, 13:08

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •