Showing results 1 to 4 of 4

Thread: Problem with IEC 104.

  1. #1
    Join Date
    30.11.2007
    Posts
    13

    Unglücklich Problem with IEC 104.

    Hello,

    How do I create a two-step command select/execute on IEC104? I needs to communicate with ABB station.

    Best regards,
    Miroslav

  2. #2

    Default Re: Problem with IEC 104.

    Hi Miroslav,

    At the variable there is a property "select before operate" that you can activate. The command processing module and the driver will take care of the select.

    Then at the command action you define it a two stage command.

    Depending on how you perform your commands, the first stage can be in the context menu (selecting the direction (open/ close), and the second stage in the command screen. Or the first stage can be in the command screen after it is opened, selecting the direction first, and then the actual execute as the second stage.

    I hope this is useful somehow. You may get a response from a different audience when posting in the energy forum. energy forum

    Best regards,
    Mark

  3. #3
    Join Date
    30.11.2007
    Posts
    13

    Default Re: Problem with IEC 104.

    Hello,

    Thank you for your answer, but I thought it through VBA?

    Best regards,
    Miroslav

  4. #4

    Default Re: Problem with IEC 104.

    Hi Miroslav,

    Could you explain a bit more, why you cannot use the command processing in the energy edition?

    With VBA currently this is not possible.

    Best regards,
    Mark

Similar Threads

  1. Replies: 9
    Last Post: 23rd February 2012, 10:04
  2. Simulation IEC 104 address
    By kirca in forum zenon Energy Edition
    Replies: 1
    Last Post: 1st September 2011, 23:26
  3. Many questions about IEC 60870-104
    By focus in forum zenon Energy Edition
    Replies: 1
    Last Post: 11th July 2011, 08:45
  4. IEC 104 primary and redundant IP addreses
    By westbaaam in forum zenon Energy Edition
    Replies: 1
    Last Post: 30th October 2009, 12:02
  5. IEC 101-104 T09 measured value
    By westbaaam in forum zenon Energy Edition
    Replies: 2
    Last Post: 21st October 2009, 06:05

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •