SICAM 230 with ABB RTU560CMG

[onder89]

I am trying to replace MicroSCADA SYS 500 with SICAM 230 6.51 to communicate with ABB RTU 560CMG. I can communicate with the RTU over ethernet but i can not send any commands to RTU. I have the IEC 104 parameters taken from RTUtil560 as excel export. My question is which values do i have to enter for O1, O2, O3, O4, O5 and what else should i do for completing this project. I have just started to learn about SCADA so if you take a look at the files and tell me your opinion i will be very gladfull.

[focus]

Example:
RTUtil:


Settings in Zenon:
variable


function(ON OFF)

[onder89]

Thanks a lot focus, you are a life saver. Your suggestions really helped me about what the problem is but i don't have IEC101_104 driver. I found out that i need to look for "Treiber_EN.xml but i could not find that file either. I am already using demo version of SICAM 230 6.51. Is there any way else to reach IEC101_104 driver?

[markclemens]

Hi Onder89,

Welcome to this forum!
Also thank you focus, for posting your experience, it is much appreciated

Sicam230 6.51 may not have the same drivers available as zenon 6.51. Please contact your Siemens energy support to find out wether or not the IEC870 driver can be used with Sicam230.

Regards,
Mark

[focus]

onder89, please read this topic http://www.copadata.com/forums/archi...hp?t-1317.html

bernhardf
22nd August 2011, 07:12
I cant find the file Treiber_EN.xml or Treiber_DE.xml.
I m trying with search but can't find it.
Where should be located?

Hi,

the files can be found here:
C:\ProgramData\COPA-DATA\zenonXXX (Vista/W7/Server 2008)
C:\Documents and Settings\All Users\Application Data\COPA-DATA\zenonXXX (XP/Server 2003)

Regards,
Bernhard

[onder89]

onder89, please read this topic http://www.copadata.com/forums/archi...hp?t-1317.html

Thanks for all comments, I have already checked this topic but i couldn't find Treiber_EN.xml. I contacted with siemens
energy department in Istanbul they said they dont have IEC101_104 diver. My question is, Can i send commands to RTU without having IEC101_104 driver? I only have AK_DRV - AK Server and i wonder if this driver is only used with siemens RTUs? I need an detailed information to explain the situation to my graduation instructor.

[focus]

Thanks for all comments, I have already checked this topic but i couldn't find Treiber_EN.xml. I contacted with siemens
energy department in Istanbul they said they dont have IEC101_104 diver. My question is, Can i send commands to RTU without having IEC101_104 driver? I only have AK_DRV - AK Server and i wonder if this driver is only used with siemens RTUs? I need an detailed information to explain the situation to my graduation instructor.

How can it may be? I have SICAM 230 6.51. Please check the directory C:\Program Files\SIEMENS\SICAM 230 6.51 SP0. You must have to find file IEC870.exe.

I finded Treiber_EN.xml in C:\Documents and Settings\All Users\Application Data\SIEMENS\SICAM 230651





Treiber_EN.xml in Attachments
Treiber.rar

[onder89]

Thanks focus,

I have founded IEC870.exe but i couldn't find treiber_en.xml so i downloaded yours and

opened it with driverinfo.exe. Now what should i do?

[focus]

Do you have folder SICAM 230651(C:\Documents and Settings\All Users\Application Data\SIEMENS\SICAM 230651)? Try to copy Treiber_EN.xml in C:\Documents and Settings\All Users\Application Data\SIEMENS\SICAM 230651.

And try paste in sicam230 Editor the new driver iec_104.
Which language are you using ?If you are using DE-Try to find Treiber_DE.xml

In Zenon manual:

When a new driver is created, a selection dialog is opened, where all available drivers are listed. The
information for this dialog are in the files Treiber_DE.xml, Treiber_EN.xml etc. depending on
the language. You can open or edit these XML files with the driverinfo.exe. tool

[onder89]

I could'nt find that folder, I have this folder C:\Program Files\SIEMENS\SICAM 230 6.51 SP0, copied treiber_en.xml in it and looked in new driver in sicam230 editor but nothing has been changed.