Showing results 1 to 3 of 3

Thread: How to calculate mean value for an angle by zenOn?

  1. #1
    Join Date
    23.04.2009
    Posts
    56

    Default How to calculate mean value for an angle by zenOn?

    Hi,

    My question is as the title: How to calculate mean value for an angle by zenOn?

    I know the calculation of mean value of an angle is not a simple subject. I just want to know if you have integrated any magic module under zenOn for this calculation or not. If not, I think I am obliged to construct this calculation by myself. That would be a little tedious..

    Best regards,

  2. #2
    Join Date
    27.06.2011
    Posts
    96

    Default AW: How to calculate mean value for an angle by zenOn?

    hi lephis,
    you can use a math variable (from the math driver) to calculate a mean value. With that you can calculate a time average and floating average.
    best regards,
    Alex

  3. #3
    Join Date
    23.04.2009
    Posts
    56

    Default Re: How to calculate mean value for an angle by zenOn?

    Thank you alexf for the answer. But you are sure this calculation will be good for an angle??

    I mean, for a simple example, my angle is at first 1 for the first acquisition, then 359 for the second acquisition. The result of time average for these two acquisitions should be 0 instead of 180. How do you think?

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •