Showing results 1 to 2 of 2

Thread: Solar PV HMI - can edit but cannot compile the entire project

  1. #1
    Join Date
    28.07.2010
    Posts
    17

    Frage Solar PV HMI - can edit but cannot compile the entire project

    Salam sejahtera,

    We're evaluating & testing the Solar PV HMI application set for 2 x 5MW large solar farm projects. I can say it impressive and easy to deploy.
    However, we need to add 3 new forms to meet TNB GRID compliant test procedure. We can duplicate the existing popup window for configuration. Unfortunately, it cause the error as below.
    Can we customize like normal Zenon projects in order to meet the plant size (qty of inverter, remove the SCB due to current design etc.)?  








    Attached Thumbnails Attached Thumbnails zenon error compile.jpg  

  2. #2
    Join Date
    12.02.2015
    Posts
    1

    Default Re: Solar PV HMI - can edit but cannot compile the entire project

    Dear misbah,

    can you please explain in detail, which screens you copied and tried to adapt? As far as I could trace back based on the element ID from the error list, you wanted to make changes in the SCB, right? Did you make the changes in the project itself or in the Smart Object Template engineering section?
    Generally, if you want to adapt content which comes from a Smart Object Template, the following options are possible:
    1) See if released properties offer enough modification options. If not, then
    2) Copy the corresponding Smart Object Template (=SOT) and make changes only in that Template. If COPA-DATA publishes a new version of the SCB one day and you wanted to update it, you would loose your own modifications. Your SOT adaptions will not be merged but overwritten. The copied SOT will get its own ID and will not be affected by that.
    3) If you want to stick with the SOT from the Application Set without a copied one, you can theoretically modify it centrally in the Smart Object Template engineering section. In that case, rather do that in the template project and not in the demo project. It is easier to keep overview of changes in a more "empty" environment. However, I'd like to emphazise, if you make changes directly in Smart Object Templates which were published by COPA-DATA, there is the risk that your modified content gets lost if you do any SOT update in future, since your SOT adaptions will not be merged but overwritten.

Similar Threads

  1. Edit .PRJ files
    By thandong007 in forum Engineering Studio & Service Engine (former zenon Editor & Runtime)
    Replies: 9
    Last Post: 14th August 2019, 13:35
  2. Graphic Compile Error
    By Olesia in forum Engineering Studio & Service Engine (former zenon Editor & Runtime)
    Replies: 1
    Last Post: 6th November 2017, 12:46
  3. .arx archive edit
    By bastien in forum Engineering Studio & Service Engine (former zenon Editor & Runtime)
    Replies: 1
    Last Post: 13th June 2012, 15:06
  4. [ZenOn 6.22 Build 1] Problem to compile commands
    By julienk in forum zenon Energy Edition
    Replies: 11
    Last Post: 23rd November 2010, 11:57

Tags for this Thread

Posting Rules

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •