Search:

okkk... problem found ... thanks a lot for your help.

Andrea

Hi Ursula,<br>by sniffing packet with wireshark, we found a big difference between the behaviour of 2 different devices with the MMS request.<br>On the image dev_1 the protocol goes like Request -...

Maybe, Zenon doesn't try to enable the report because MMS communication must be enstablished first.... in LOG where can I find the MMS abilitation request messages?

Thanks,
Andrea

<font color="#333333" style="color: rgb(51, 51, 51); background-color: rgb(250, 250, 250);">Hello everybody,</font><br style="color: rgb(51, 51, 51); background-color: rgb(250, 250, 250);"><font...

Hi Marco,<br>you can try to set in alarm filter (also in the function that switch to alm page) some parameters like (no time filter ... variable name).<br>I think I had same...

Hello everybody,
I'm working on Zenon Operator 7.50

In my project there are two type of 61850 IED device, both can support SNTP synchronization.
In the pc where Zenon is running the changing of...

It can be a good improvment for the future :)

Thank you for your reply :)

Andrea

Hello everybody,
I'm working on Zenon Operator 7.50
In my project I need to connect N devices of same type. Each device is defined in Zenon like 61850 server with different net address.
I'm using...

Hello,<br>maybe it can be a synchronization problem... My device supports SNTP synchronization.<br>It is possible to synchronize also Zenon via SNTP?<br><br>Thank you,<br>Andrea

Hello Ursula,
in my device I have 5 URCB (I have a test program (by vendor) for testing the connection and in this program connection is estabished correctly and 5 URCB can be activated).

If in...

If I compare IED descriptor with REPORT ENABLE(that doesn't communicated with zenon) and REPORT DISABLED(comm OK) I found this part in REPORT ENABLE descriptor that I don't have in DISABLE...

Hello Ursula,
I'll check it... but I don't understand why if in my device RCB are enabled communication doesn't work... same device, RCB disabled, communication works :confused:
(about zenon LOG...

Hello everybody,
I'm working on Zenon Operator 7.50. I have read IEC850 Zenon Driver Manual.

I need to connect to a device via IEC61850 protocol.

I detected 2 different working case:

CASE...

Hi Georg,
Thank you so much...Now it is working! :cool:

Andrea

Hi,<br>I have done the same thing (ref to fig)...but only screen0 on real monitor (left monitor) is shown.<br>Other parameters that I have set are correct? (top of this post)<br><img...

<font color="#333333" style="color: rgb(51, 51, 51); background-color: rgb(250, 250, 250);">Hello everybody,</font><br style="color: rgb(51, 51, 51); background-color: rgb(250, 250, 250);"><font...

Hello Felixist,<br><br>Yes, I have read the manual first to post my problem.<br>I tried to define a variable in this way (ref to fig) but I missed symbolic address... now it seems working...

Hello everybody,
I'm working on Zenon Operator 7.50.

I have define IEC 61850 Driver with 4 server (ref to fig). Everything is working fine.
My question is: where can I find the connection state...

Hello everybody,<br>I'm working on Zenon Operator 7.50.<br>I have 3 monitosr (M1[FULL-HD]: 1920x1080, M2[FULL-HD]: 1920x1080, M3[16:10]: 1920x1200).<br>The monitors will show different...

Hi,<br>limit value is a very good idea if I have 2 function and I want insert a delay like this:<br><br>- function 1<br>- wait<br>- function 2<br><br>Thank You&nbsp;<img src="images/smilies/cool.png"...

Thank You for the solution you suggested!<br>I managed to find it on my own, and I'm glad it matched the one you proposed.<br><br>Thanks again for your help!<br><br><br>

Hello,

I need to insert an image (ex. a company logo .png .bmp .jpg) in a screen... How I can do it?

I'm trying to insert it in a new symbol... but I don't know how to do it...
If I insert the...